TCU TurboLamik

valve plates between 70 and 75 is not compatibile.

Plastic electronic with soldered PCB is compatibile between all 45/50/51/70/75/76. 90/95/96 have longer sensors

Remember after change gearbox model you must change base file in TCU

Hi, You should start with information about your car... What car? What engine? What engine ECU?

Yes, in an 8hp there should also be some play, just like in older gearboxes. About 2mm is fine.

Luk66 didn't mention he was talking about a 2011 F02 with 6hp. I spoke with him via WhatsApp. I'm thinking about solving the problem.

provide basic information.

What car
Whate engine
What engine ECU
What gearbox model
What TCU software version
What TCU base map version

Write to turbolamik technical support.

Check pin 70. older TCUs with serial numbers starting with A B and C may not have power on pin 22.

52 green is connected to selector 12v

this error says that the log file cannot be saved. It cannot be saved because the program does not know where to do it. Just click "save bin as" and enter any location. the log will be saved where the bin file is and the error will disappear

for 8hp55 selector cord there are different base maps
for 8hp55 witchout selector there are different base maps
neither one nor the other gearbox type is compatible with 8hp70 base maps. characteristics and valve type are different.
same 8hp65 also has different base maps.

base maps for audi ...

I don't see anything wrong here. can you explain?