Bum function is enabled by default after an update
Video How To Activate Bump
- Enable Pump:
Activation of the bump function
-Pump base clutch presure:
Initial pressure when the bump function is activated.
-Enable ramp, pressure reduction:
A ramp that lowers the clutch pressure when the bump function is activated.
It is enabled by default after an update.
- Pump Torque presure corection:
Parameter increasing pressure on clutches.
The pressure is raised in proportion to the engine torque.
If the parameter is set correctly, the thrust force of the car is constant regardless of the engine torque.
-Pump Max distanse:
the distance that the car is to travel.
The distance is counted in pulses from the gearbox output RPM sensor.
8HPxx gearbox It has 40 impulses per one turn of the output, values of 10 give us 1/4 of a turn
-Pump distanse Clutch pres. up:
Pressure build-up when the car is moving.
The pressure on the clutch increases by the value entered in the window each time an impulse from the RPM sensor is detected
This parameter prevents the car from accelerating
1 post • Page 1 of 1