Configuration of Ecumaster devices

Post Reply
admin
Site Admin
Posts: 40
Joined: 13 Aug 2021, 18:24

Configuration of Ecumaster devices

Post by admin »

ADU PMU Can

file describing can frames in ADU and PMU devices
can TCU.rar
(447 Bytes) Downloaded 203 times
ADU_PMU.png
ADU_PMU.png (76.59 KiB) Viewed 674 times
admin
Site Admin
Posts: 40
Joined: 13 Aug 2021, 18:24

Emu BLACK

Post by admin »

Basic configuration to be imported in Emu Black

In the can configuration table: CAN>>CAN2 Type Car
insert value "1"
TCU will connect in the communication standard "Emu Black" and "Emu CLassic"
Emu Black TCU Config.rar
(2.48 KiB) Downloaded 274 times
TCU configuration For EMU BLACK
TCU emulates the ECM CAN SWITCH BOARD (CSB V3) expansion board
the "CSB V3 Analog Can Out" map is for custom data sending. By entering the appropriate value, we can send any parameter
Remember that frame addresses are given in decimal value, not in hexadecimal value
Emu Black.png
Emu Black.png (126.77 KiB) Viewed 675 times
Post Reply