Tcu replaces the original gearboxes for cars after can:
BMW 6HP Exx Series (E9X, E6X)
BMW E46, E39 3.0D 204HP
BMW FXX (READ ONLY)
Nissan 350Z (read only)
Mercedes CLS 55AMG 5-Gtronic
Camaro SS, Silverado (09-15r)
Trailblazer, Saab 97X (05-08r) GM E67 ECU
Support Read Can Haltech, sending as I/O Expander12(Box AB)
Communication with Stand Alone controllers:
Ecumasetr
Motec M1
Link G4X
MaxxECU
Controller It transmits and receives frames in its standard which can be used to establish communication with any device.
Can communication
Description of the transmitting protocol
In the frame define value you can send the torque limit parameter.
This parameter is generated when shifting up gears. "0" means 0% torque cut and "5000" means 100% torque cut
In tcu, you can set any linearization of the sent parameter in the range of 0-65535
This parameter is generated when shifting up gears. "0" means 0% torque cut and "5000" means 100% torque cut
In tcu, you can set any linearization of the sent parameter in the range of 0-65535
- TCU CAN standard Send1.png (55.19 KiB) Viewed 4284 times
- TCU CAN standard Send2.png (37.14 KiB) Viewed 4284 times
Receiving protocol description
- TCU CAN standard Read.png (45.91 KiB) Viewed 4288 times