Page 1 of 1
E36 shifter issue
Posted: 25 Mar 2023, 18:15
by Nazeem
Hi guys. Iv fitted a 8hp70 with f30 330d shifter on my e36 drag car. Using a non can ecu .everything is reading perfectly on the lamic.all analogue inputs fine but when i shift to drive on p1 the display shows 6M...R..N.P all fine.what could be the issue.thanks
Re: E36 shifter issue
Posted: 25 Mar 2023, 18:19
by Nazeem
Only error is 033 can bus
Re: E36 shifter issue
Posted: 06 Apr 2023, 10:58
by Jar
when there are errors in the TCU, the operation of the gearbox is limited to 6 gear. If the TCU is configured as ANALOG then CAN must be disabled in the TCU
Re: E36 shifter issue
Posted: 01 Jul 2023, 02:26
by manc
Jar wrote: 06 Apr 2023, 10:58
when there are errors in the TCU, the operation of the gearbox is limited to 6 gear. If the TCU is configured as ANALOG then CAN must be disabled in the TCU
So is this why I get 0v on (50) Analog Out 2 (Tq. Reduction) ? Because I'm running Can1 (selector) and Can2 (engine)?