TCU TurboLamik

What's your engine ecu?

(X) axis engine speed
(Y) axis gearbox torque
Reduction in % Torque
100%- No torque reduction
0%- Max Torque Reduction

you need to use torque reduction and activate the Virtual Parameter in Emu, it will trigger you ignition cut
blip only from the paddles, during the winter I will work with a closed-loop blip, as it is now with torque reduction

At 8hp only torque reduction.
You need to delay the ignition timing.
for the 8HP70 gearbox, the torque when shifting up gears should not exceed 700nm.

do not use spark CUT

map lookup dependency
Same relationship for automatic mode

in tcu 100% means 100% of engine torque. If you want to make a full cut, you set the torque to 0%
you have connected pull up on the analog input in Emu?

try to upgrade the driver
viewtopic.php?f=14&t=92
download/file.php?id=135

if that doesn't help, write me what engine driver you have so that I know what your can

We have 8000 rpm in the S54B32

The output is active when the condition is met: "Torque Reduction Table" <"Torque Reduction Output Value"

This is an error in the description
I have already corrected it and it looks like this