Error 33

[Luk66]

Error 33 coming after uploading bin map for 8hp45, selector stuck in park unable to change, when I first installed the tcu car was able to move and reverse and select neutral

[M4comp]

So error 33 is no communication on CAN2 - which is the connection of the TCU to the ECU.
If you have loaded a new file and the error just occured, try opening the new file in tuner pro and select compare then load bin. Put the previous file into Bin 1 and hit ok.
Then go to tools and select the difference tool, check the limit search to defined items only box and hit search. If you see a difference on CAN2 settings you'll need to transfer them over to the new file.

[Luk66]

Just found out that the plug from my 6hp is different to the one provided from turbolamik 6hp to 8hp apparently my f02 has a different return towards can lines coming from tcu

[Luk66]

Can lines from pin 2 and 6 are still normal the return coming from tcu is not