ERROR 33
ERROR 33
After installing tcu wiring harness to convert 6hp to 8hp I was able to select park reverse neutral and 6 gear after tcu update and bin map 8hp45 the car is coming with a fault code 33 I’ve tried to change the selector also inverted can lines into the selector, change the selector map number but still no luck anyone could help me on this one also I’ve checked the wiring from my 6hp connector and are not the same gear not showing on dashboard but car was moving
Re: ERROR 33
Error 33 is no commuication from TCU to ECU on CAN2.
The can bus your gear selector is on will be CAN1.
CAN2 is what connects to the car or directly to the ecu if using an aftermarket. You need to verify you have CAN2 connected
The can bus your gear selector is on will be CAN1.
CAN2 is what connects to the car or directly to the ecu if using an aftermarket. You need to verify you have CAN2 connected
Re: ERROR 33
Luk66 didn't mention he was talking about a 2011 F02 with 6hp. I spoke with him via WhatsApp. I'm thinking about solving the problem.