Stuck in P1

[BMWM4]

Hey guys I have a quick question, turbo lamik was successfully up and running for 1 day then then suddenly it is locked in p1 and wont let me change out of that program. no error codes on display, i tried power reset several times and its not resolving the issue. any ideas are appricated thanks. all software xdf and adx files are current 10.74.

[Richard.C]

Have you checked the analogue input value is changing when switching between positions on the rotary switch? (Assuming you are using the rotary switch for program selection)

[BMWM4]

yes its active in Park and N you can selects gears but when you switch to drive it reverts back to P1. I am going to down load and re load the current bin see if that clears it. I am a new user so there is a learning curve.

[M4comp]

If you are in 'normal' mode on the shifter the program value won't change. You need to be in sport or manual mode to change p number