F Series DCT Selector question

[Tom]

Hi,

You added the support for the DCT , just one question. Are the letters light up on the shifter?

Thanks

Tom

[Luki]

Yes all letters display
in tcu the selector FXX is set and tcu itself detects DCT or 8HP automatically

[Tom]

Great, thank you!

[Mata]

Is it possible to send CAN to shifter to turn on orange backlight, like in photo?

6D0E7365-3DF9-40C9-BB5D-4E4599EA85BA.jpeg (87.04 KiB) Viewed 4315 times

[Luki]

Yes, but I have not found what frame is responsible for this

[e83 s54 8hp]

Message is sent after light on and you need connect can2 to selector. I can actuate light with diagnostic tool.

[Mata]

Credit to a couple of guys on the Facebook group chat for the idea. I’ve modified the shifter internally to use a spare connector pin (pin 9) and jumped this via a 1k resistor to the brown wire (next tot the black wire) on the bundle leading from the pcb up to the shifter joystick. Wired pin 9 into +12v dashboard illumination which the orange backlight now follows.

[e83 s54 8hp]

Credit to a couple of guys on the Facebook group chat for the idea. I’ve modified the shifter internally to use a spare connector pin (pin 9) and jumped this via a 1k resistor to the brown wire (next tot the black wire) on the bundle leading from the pcb up to the shifter joystick. Wired pin 9 into +12v dashboard illumination which the orange backlight now follows.

[honk3times]

does tcu support aftermarket electronic shifter?

im coming here from htg after their tcu was not the greatest but i would like to use the electronic sequential style shifter i have from them since i cant return it.
since it doesnt have the ability to slide left to engage sport mode, can i just wire it to a switch and manually turn it off and on? thank you!

[Luki]

You can connect. You will switch between manual and automatic modes with the program switch